Home > Wanted > Rail/Steam-AU Now viewing: 1
Select category

WANTED (Australia)

(Rail/Steam and railway related items, machinery)

  

Note: e-mail contacts are written in a form to reduce spam. Replace the term (at) with the @ symbol and delete any spaces.
example:  someone (at) example.com  becomes  someone@example.com

WANTED - Rail/Steam, railway related, machinery (Australia)
WANTED Ref: 01291  Gauge: 71/4"  Top
Description: Wanted:- drawings and castings for Lil Lima 71/4"g narrow gauge locomotive to Wato Loco design.
Location: Somerville, Vic
Contact: email: treth.pam (at) bigpond.com
01281-1
WANTED Ref: 01281     Top
Description: A vertical metal cutting bandsaw similar to the one in this photo. Prefer bench mounting model rather than floor mounting if possible.
Location: Sydney, NSW
Contact: email: deeja9 (at) yahoo.com.au
0 views  
WANTED Ref: 01271  Gauge: 5"  Top
Description: Wanted NSWGR D50, Z12, or Z19 or VR K, or A2 live steam locomotive.
Second hand, or built to order on contract, ready to run, 11/8" to foot scale, compliant with AMBSC boiler code, AALS wheel standards and current boiler certificate.
Location:  
Contact:  ITEM FOUND 
WANTED Ref: 01248  Gauge: 5"  Top
Description: I'm looking for an operational 1 inch scale single cylinder westinghouse pump in good condition, with a preference for one of Warwick Sandberg's.
Location:
Contact:  ITEM FOUND 
WANTED Ref: 01243  Gauge: 71/4"  Top
Description: Looking for a 7¼"g, Narrow Gauge, 'Watto' type loco. Looking for large loco with outside frames.
Preferably with current boiler certificate, but not essential.
Genuine buyer. Interstate sellers welcome.
Location:
Contact:  ITEM FOUND 
WANTED Ref: 01240  Gauge:  Top
Description: Plans For LBSC Virginia
Location: Brookfield, Vic
Contact: email: nandpsales (at) bigpond.com
WANTED Ref: 01234  Gauge: 101/4"  Top
Description: Require another locomotive for 101/4" inch (260mm) railway, prefereably petrol/diesel in operating condition,
or minor repairs required to make operational. All items considered etc.
Location: Pelaw Main, NSW
Contact: Ph: Chris, 0432 038 559, or
email: chriscleary1 (at) bigpond.com
WANTED Ref: 01219  Gauge: 5"  Top
Description: 5 inch gauge 'SPEEDY' or 'SIMPLEX' chassis, preferably running.
Will consider near complete, to overhaul or damaged to repair items.
Location:
Contact:  ITEM FOUND 
WANTED Ref: 01217  Scale: 3"/ft  Top
Description: 3"/ft scale traction engine part built or with gears/casting and plans.
Anything considered
Location: Adelaide, SA
Contact: Ph: Anthony, 0417 830 990, or
email: anthonylauner (at) hotmail.com
WANTED Ref: 01215  Gauge: 71/4"  Top
Description: 7¼"g Narrow gauge style or tank loco for new club member, some repairs OK.
Also require tender/riding car.
Location: Queensland
Contact: Ph: Bernie, 07 3265 1266, or
email: clarktech (at) bigpond.com
WANTED Ref: 01212  Gauge: 31/2"  Top
Description: Looking for a 3.5" gauge 'Tich' 0-4-0 loco, finished or unfinished.
Location: Geelong, Vic
Contact: email: pcclarkey2 (at) gmail.com
WANTED Ref: 01209  Scale: 2"/ft or 3"/ft  Top
Description: 2"/ft or 3"/ft scale traction engine. Copper boiler preferable. Anything considered.
Location: South Australia
Contact: Luke, email: lsharfull (at) bigpond.com.au
WANTED Ref: 01210  Gauge: 5"  Top
Description: GENUINE BUYER looking for a Q.G.R. A12 5" gauge locomotive 4-4-0, built or unfinished project. Have recently joined an active club and want to get started.
Interstate sellers welcome.
Location: Queensland
Contact: Ph: Jerry Fieldman, 07 4946 6058
WANTED Ref: 01202  Gauge: 71/4"  Top
Description: K36 Rio Grande 71/4" loco. Running order and preferably current boiler certificate.
Looking for a quality loco and I am a genuine buyer with no budget for the right item.
Interstate and NZ sellers welcomed.
Location: Victoria
Contact: Ph: Drew, 0418 312 587, or
email: amarget (at) margeteng.com.au
WANTED Ref: 01183  Gauge: 71/4"  Top
Description: Looking for a 71/4"g, Narrow Gauge, "Watto" type loco, preferably with current boiler certificate, but not essential.
Have recently joined an active Club and want to get started!
Genuine buyer. Interstate sellers welcome.
Location:
Contact:  ITEM FOUND 
WANTED Ref: 01097  Gauge: 2ft  Top
Description: We are looking for a 2ft gauge Loco (Steam or Diesel) to run on our 4.5 km track in Marlborough, New Zealand. We would look at purchase or long term lease options. We will restore and maintain to the highest standards. Your engine will be loved and cared for by a very keen and knowledgeable group of society members. Complete or incomplete locos will be considered.
Location: Blenheim, New Zealand
Contact: Gary Coburn gary (at) coburn.cc, or
John Orchard johno (at) marlboroughmuseum.org.nz
WANTED Ref: 01092   Top
Description: 2"/ft Clayton Undertype Waggon - live steam road vehicle. Have boiler and engine, last steamed about 1994, but no details or drawings. Would like to purchase a set of drawings and the ME construction series from 1986. Some fittings also required. Plan to use initially as a stationary plant, then a 4-coupled 5" gauge loco.
Location:
Contact:  ITEM FOUND 
WANTED Ref: xxxxx  Top
Description: More ads for this page. Find your wanted items by putting an ad here.
These ads are read by people all over the world, 24 hours/day 365 days/year.
Location: Your location
Contact: Your contact here
Navigation for browsers with Java disabled
Rail/Steam-AU | Rail/Steam-NZ | Marine-AU | Marine-NZ | FOR SALE
[Updated: 03 Dec 2011]
13,238		 Text and photos Copyright © 2006-2012 SMEX, All rights reserved. Top of page

If you cannot see the menu bar and logo at the top of the screen click here.